Phoenix Demolition Co. provides residential, commercial, and interior demolition throughout Peoria, Arizona. Our scope also includes selective and structural demolition, concrete and pool removal, garage and shed removal, flooring removal, and site clearing. We work on everything from a bathroom stripped to the studs to a complete building teardown. Each project starts with a clear look at the structure, access, utilities, and intended end use.
Peoria projects vary from 1970s ranch homes near Old Town to newer custom construction in North Peoria. Older buildings may need asbestos review, while dense lots, shared driveways, and HOA work-hour rules can shape equipment and scheduling. Arizona heat and dry soil also make dust suppression and site containment central to the plan. We provide a free written estimate after a site walk so owners can understand the likely scope before demolition begins.
We are licensed under Arizona Registrar of Contractors requirements and insured for residential and commercial work. Crews travel throughout Greater Peoria, from the Peoria Sports Complex and Lake Pleasant Parkway to neighborhoods near the Yavapai County line.
Choose a scope that fits the property and what must remain. We handle targeted interior work, full structural removal, material-specific demolition, and cleanup across Peoria. Property owners comparing another nearby project can also review our demolition service information for Goodyear, AZ .
Whole-house demolition can include utility disconnects, a pre-demolition material survey when required, mechanical removal with excavators, foundation work, and debris hauling. The final approach depends on square footage, construction type, site access, and what the owner plans to build next.
Explore Service
Commercial demolition covers retail spaces, office buildouts, and light industrial buildings along corridors such as 83rd Avenue and Lake Pleasant Parkway. Phased work can coordinate structural removal and MEP disconnections with property managers, general contractors, adjacent tenants, and the City of Peoria Building Safety Division.
Explore Service
Interior demolition strips kitchens, bathrooms, flooring, or full rooms to the studs, subfloor, or bare walls while preserving the exterior shell. Containment barriers and negative-air setups help protect adjacent finished areas during occupied-home and tenant-improvement work.
Explore Service
Selective demolition removes a specific wall, ceiling section, fixture, or damaged area while leaving surrounding construction intact. Load-bearing elements call for careful load calculations and may require engineering sign-off before structural cutting begins.
Concrete demolition applies to driveways, patios, slabs, and reinforced foundations. Hydraulic hammers and saw-cutting equipment break material into manageable pieces, and suitable concrete can be sent to recycling facilities for processing into reusable aggregate and base rock.
Backyard pools built in the 1980s and 90s may now be cracked, leaking, or simply unwanted. Pool demolition can involve full removal or partial fill-and-cap work, followed by drainage grading and backfill compaction; hot tub removal can be included in the same cleanup scope.
Structural demolition addresses load-bearing walls, roof trusses, additions, and foundation systems. Fire- or water-damaged sections and full teardowns often need engineering review and a structural permit before the crew removes critical building components.
Garage removal can include the roof structure, block or wood-frame walls, and the slab below, especially where a garage built before 2000 no longer fits current setback or use needs. Wood-frame sheds may come down within a few hours, with treated lumber, metal siding, and concrete pads separated for appropriate disposal.
Flooring removal covers tile, carpet, and hardwood ahead of a remodel. Vacuum-shrouded tools used for dustless tile removal can reduce airborne silica compared with standard demolition hammers, an important consideration in occupied homes and for people with respiratory sensitivity.
Site clearing brings grading, debris hauling, and disposal coordination into one closeout plan. Concrete, metal, and wood can be separated from mixed waste where practical, reducing landfill volume while supporting Arizona Department of Environmental Quality waste-handling expectations.
The right approach depends on whether the entire structure or only selected materials must go, plus construction type, equipment access, permits, and the intended finish condition. A 2015-built home in Vistancia can present a very different scope from an older block house near Old Town Peoria, so the estimate should start with the property rather than a generic demolition package.
Start by deciding what must be removed and what must remain. A whole-building teardown calls for a different sequence than a kitchen gut, single-wall removal, or partial fire-damage scope.
Wood framing, masonry block, reinforced concrete, tile, metal, and treated lumber require different tools, labor, and disposal plans. Identifying materials early also helps separate recyclable debris from mixed waste.
Narrow lots, shared driveways, neighboring walls, setbacks, and HOA work-hour limits can determine whether large equipment fits the site. The access plan should account for crew movement, debris loading, and protection of nearby property.
Construction date, structural scope, utility status, and possible hazardous materials affect what documentation is needed. Confirming those items before mobilization reduces the chance of a permit or stop-work delay.
Water suppression helps control dust during concrete breaking, while barriers, negative air, and vacuum-shrouded tools protect adjacent finished spaces. The site plan should also account for Maricopa County Air Quality Department rules when disturbance thresholds apply.
A complete scope should say how concrete, metal, wood, and mixed waste will be handled, where debris will be hauled, and what condition the ground will be left in. Grading and compaction matter when landscaping or new construction follows.
Local demolition problems often hide behind finished walls, below slabs, or in the logistics around the property. A careful site walk can identify utility, structural, access, dust, and soil concerns before they become expensive changes during the job.
Request Project EstimateOlder Peoria homes may need an asbestos survey before demolition. Testing and any required abatement must be resolved before materials are disturbed or a demolition permit can move forward.
Electric, gas, water, plumbing, and mechanical connections must be identified and cleared before removal starts. Missing a live service or an uncapped line creates safety, inspection, and scheduling problems.
Shared walls, close setbacks, narrow access points, and occupied neighboring properties limit equipment choices. Selective sequencing and smaller loading zones can help protect surfaces and structures that must remain.
Peoria's heat and dry conditions can send dust beyond the immediate work area during concrete breaking, grading, and interior removal. Water suppression, containment, and controlled debris handling are essential parts of the setup.
A wall, roof truss, or foundation section may carry more of the structure than it appears to. Structural review and engineering sign-off help prevent unintended movement when only part of a building is coming out.
A leaking or unused pool leaves more than a concrete shell to address. The removal plan must account for excavation, drainage, backfill, compaction, and the future use of the yard.
Phoenix Demolition Co. combines local project knowledge with licensed, insured residential and commercial demolition service. We build estimates around the actual structure, communicate the planned sequence, and coordinate the permitting, safety, debris, and cleanup details that affect the property owner.
Familiarity with the City of Peoria Building Safety Division helps organize site plans, utility confirmations, structural documentation, and material surveys in the format reviewers expect.
Crews check structural stability, utility clearance, fall protection, fencing, posted boundaries, and dust controls before and during active work. Methods adjust to occupied spaces, neighboring properties, and the equipment on site.
We coordinate with owners, property managers, general contractors, and HOAs when required, then communicate timing so neighbors and tenants understand the plan. Debris removal and a clean, properly graded site are part of the final handoff.
A defined sequence keeps permits, safety controls, demolition, hauling, and final grading aligned. The exact steps adapt to the building and scope, but each project begins with field verification and ends with the agreed site condition.
We assess the structure type, square footage, utility locations, equipment access, shared walls, setbacks, and the owner's intended outcome. That information defines what comes out, what stays, and what belongs in the written estimate.
Electric and gas disconnects are verified with Arizona Public Service or Southwest Gas as applicable, and water is confirmed capped at the meter. The structure's age and materials determine whether testing or abatement documentation is needed.
The City of Peoria Building Safety Division reviews the demolition permit package, including the site plan and utility confirmations. Structural removals may also need calculations or an engineer's sign-off before work begins.
Active work areas are fenced and posted, equipment routes are established, and adjacent finishes or properties are protected. Water suppression, interior barriers, or negative air are set up according to the demolition method.
Crews use excavators, hydraulic hammers, saws, and hand tools as the structure requires while following OSHA 29 CFR 1926 demolition standards and National Demolition Association practices. Concrete, metal, wood, and mixed waste are separated where practical during removal.
Debris is hauled to appropriate disposal or recycling facilities, then the remaining ground is graded and compacted as the scope requires. The final walkthrough confirms that the site is clean and ready for landscaping, renovation, or new construction.
Case Study 1: Older block-home teardown: A full-removal plan can combine utility verification, material review when required, mechanical demolition, foundation removal, and debris hauling so the lot is prepared for its next use.
Case Study 2: Occupied interior renovation: Selective removal, containment barriers, negative-air setups, and vacuum-shrouded tools can protect adjacent finished areas while kitchens, bathrooms, or flooring are opened for remodeling.
Case Study 3: Backyard reset: Pool, hot tub, garage, or shed removal can include slab breaking, appropriate debris disposal, backfill compaction, and grading before landscaping or new construction.
Request a free written estimate before committing to a renovation, pool removal, selective interior scope, or full teardown. A site walk gives us the structure, access, utility, permit, and debris details needed to define the work.
These answers cover common questions about pricing, permits, timing, dust, service areas, and residential demolition planning. A property-specific site walk is still the best way to confirm scope and estimate details.
Call Our Demolition TeamHouse demolition in Arizona typically runs $4 to $17 per square foot, while most complete residential teardowns fall between $6,000 and $30,000 depending on size, construction, access, and site conditions. Pools, detached structures, difficult access, and required abatement can raise the total. We provide a written estimate after a site walk.
A 2,000-square-foot house typically costs between $8,000 and $34,000 to demolish. Wood-frame homes generally range from $4 to $8 per square foot, masonry or block construction from $7 to $12 per square foot, and reinforced concrete from $10 to $18 per square foot. Site access, added structures, and abatement needs can move the final price.
Smaller tasks such as a shed, fence section, or limited interior demolition average closer to $800, with a typical range between $644 and $1,000. Material type, disposal volume, access, utility work, and permit requirements still affect the property-specific estimate.
A City of Peoria demolition permit typically includes a site plan showing the structure and property boundaries, confirmation that electric, gas, and water services are disconnected or capped, and any required material-survey documentation. The permit process also verifies the demolition contractor's licensing status with the Arizona Registrar of Contractors.
If a home was built before 1980, the draft project requirements call for an asbestos inspection before the demolition permit is issued. Arizona Department of Environmental Quality requirements and EPA NESHAP regulations guide the survey and any necessary abatement. Testing should be resolved before materials are disturbed.
Most residential demolition jobs run one to three days once permits, disconnects, testing, and site setup are complete. Square footage, foundation type, construction materials, access, and the amount of sorting or excavation can change the field schedule.
Peoria generally limits heavy construction and demolition noise to daytime hours, especially near residential properties. Because allowed hours can depend on current city code and zoning, we confirm the applicable requirements before scheduling equipment-heavy work.
Unpermitted bathroom demolition or remodeling can lead to a stop-work order, fines, and problems during a later sale or inspection. The City of Peoria may require retroactive permits and inspections, sometimes including the reopening of finished areas so concealed work can be verified.
Small detached sheds are commonly exempt when they are around 200 square feet or less, but the threshold can vary with zoning and whether the structure has electrical or plumbing connections. Confirm the current rule directly with the City of Peoria Building Safety Division before building or removing a shed.
Full pool demolition removes the shell and associated material, while partial fill-and-cap work leaves an approved portion in place before backfilling. Both approaches require attention to drainage, compaction, grading, and the yard's future use.
Water suppression controls dust during concrete breaking and soil disturbance, while containment barriers and negative-air setups help during interior demolition. Vacuum-shrouded flooring tools can further limit airborne silica in occupied spaces.
Yes. Flooring-removal scopes can include tile, carpet, and hardwood ahead of a remodel, with the tool and disposal plan adjusted to the material. For tile, vacuum-shrouded tools can reduce airborne silica compared with standard demolition hammers.
Service covers North, West, South, and East Peoria, including areas near the Peoria Sports Complex, Lake Pleasant Parkway, Arrowhead, Vistancia, Trilogy, and Old Town Peoria. The broader coverage described in the source also includes Glendale, Surprise, Sun City, Sun City West, northwest Phoenix, Maricopa County, and Peoria's northern reach toward Yavapai County.
Peoria grew from 154,065 residents in 2010 to 190,985 by the 2020 census. The city was described as Arizona's ninth-largest by population and sixth-largest by land area, with housing that ranges from established central neighborhoods to newer North Peoria communities. That variety creates different demolition scopes, access conditions, and construction materials across the city.
Yes. Phoenix Demolition Co. is described as licensed under Arizona Registrar of Contractors requirements and insured for residential and commercial work. Free demolition estimates are available after a site walk so the written scope reflects the actual property.